Clausius theorem
Clausius theorem is a theorem that for a thermodynamic system undergoing a thermodynamic cycle, the following inequality holds: ∮ δ𝑄/𝑇 ≤ 0, where δ𝑄 is heat absorbed by the system and 𝑇 is the temperature.
All 2 facts, and where they come from
Facts
2 facts · 0 confirmed by two sources · 0 cited · 2 from one source
Where this comes from
Papalocal keeps its own record. It started from these sources; what each one said is kept here as it was copied, so a change on their side never changes this page by itself. Tap one to read its version.
What Wikidata says · copied November 17, 2026 · revision 2499489177
- Described as
- theorem that for a thermodynamic system undergoing a thermodynamic cycle, the following inequality holds: ∮ δ𝑄/𝑇 ≤ 0, where δ𝑄 is heat absorbed by the system and 𝑇 is the temperature
- Other names
- Clausius inequality
- What it is
- theorem
- Named after
- Rudolf Clausius
- Wikipedias with a page
- 21
Wikidata item Q2428364 (wikidata.org/wiki/Q2428364), public domain (CC0). Copied 2026-11-17.
What Wikipedia says · copied November 17, 2026 · revision 1355018998
The Clausius theorem, also known as the Clausius inequality, states that for a thermodynamic system (e.g. heat engine or heat pump) exchanging heat with external thermal reservoirs and undergoing a thermodynamic cycle, the following inequality holds.
−∮dSRes=∮δQTsurr≤0,
where ∮dSRes is the total entropy change in the external thermal reservoirs (surroundings), δQ is an infinitesimal amount of heat that is taken from the reservoirs and absorbed by the system (δQ>0 if heat from the reservoirs is absorbed by the system, and δQ < 0 if heat is leaving from the system to the reservoirs) and Tsurr is the common temperature of the reservoirs at a particular instant in time. The closed integral is carried out along a thermodynamic process path from the initial/final state to the same initial/final state (thermodynamic cycle). In principle, the closed integral can start and end at an arbitrary point along the path.
The Clausius theorem or inequality implies ∮dSRes≥0 per thermodynamic cycle, meaning that the entropy of the reservoirs increases or does not change, and never decreases, per cycle.
For multiple thermal reservoirs with different temperatures (T1,T2,…,TN) interacting a thermodynamic system undergoing a thermodynamic cycle, the Clausius inequality can be written as the following for expression clarity:−∮dSRes=∮(∑n=1NδQnTn)≤0.
where δQn is an infinitesimal heat from the reservoir n to the system.
In the special case of a reversible process, the equality holds, and the reversible case is used to introduce the state function known as entropy. This is because in a cyclic process the variation of a state function is zero per cycle, so the fact that this integral is equal to zero per cycle in a reversible process implies that there is some function (entropy) whose infinitesimal change is δQT.
The generalized "inequality of Clausius"dSsys≥δQTsurr
for dSsys as an infinitesimal change in entropy of a system (denoted by sys) under consideration applies not only to cyclic processes, but to any process that occurs in a closed system.
The Clausius inequality is a consequence of applying the second law of thermodynamics at each infinitesimal stage of heat transfer. The Clausius statement states that it is impossible to construct a device whose sole effect is the transfer of heat from a cool reservoir to a hot reservoir. Equivalently, heat spontaneously flows from a hot body to a cooler one, not the other way around.
From the Wikipedia article “Clausius theorem” (en.wikipedia.org/wiki/Clausius_theorem), by its contributors, under CC BY-SA 4.0 (creativecommons.org/licenses/by-sa/4.0/). Copied 2026-11-17; not changed.
Confirmed Two sources agree. Cited One source, and it names where it got it. One source One source, without a reference of its own. Sources disagree The sources disagree. We show the best-supported value and keep theirs below.
