
Lewis and Clark Bridge
Lewis and Clark Bridge is a historic bridge in Washington state and Oregon, USA. It came out in 1930.
- Came out
- March 29, 1930
All 6 facts, and where they come from
Facts
6 facts · 0 confirmed by two sources · 2 cited · 4 from one source
Where this comes from
Papalocal keeps its own record. It started from these sources; what each one said is kept here as it was copied, so a change on their side never changes this page by itself. Tap one to read its version.
What Wikidata says · copied November 17, 2026 · revision 2556049113
- Described as
- historic bridge in Washington state and Oregon, USA
- Other names
- Longview Bridge
- What it is
- cantilever bridge; road bridge
- Came out
- March 29, 1930
- Located in
- Longview · 1 reference
- Country
- United States · 1 reference
- Named after
- Lewis and Clark Expedition
- Wikipedias with a page
- 5
Wikidata item Q1822180 (wikidata.org/wiki/Q1822180), public domain (CC0). Copied 2026-11-17.
What Wikipedia says · copied November 17, 2026 · revision 1373477486
The Lewis and Clark Bridge is a cantilever bridge that spans the Columbia River between Longview, Washington, and Rainier, Oregon. It is the only bridge over the Columbia between Astoria and Portland (a distance of about 90 miles (145 km)). At the time of its completion, it had the longest cantilever span in the United States.
The bridge was opened on March 29, 1930, as a privately owned bridge named the Longview Bridge. The $5.8 million cost (equivalent to $89 million in 2025 dollars) was recovered by tolls, $1.00 for cars and $0.10 for pedestrians (equivalent to $15.32 for cars and $1.53 for pedestrians in 2025 dollars). At the time it was the longest and highest cantilever bridge in the United States. The state of Washington purchased the bridge in 1947 and the tolls were removed in 1965 after the bridge was paid for. In 1980, the bridge was rededicated as the Lewis and Clark Bridge in honor of the Lewis and Clark Expedition. The deck was replaced in 2003–04 at a cost of $29.2 million.
Due to its width, there are very few bridges over the western portion of the Columbia River, which forms the border of Washington and Oregon. Until the completion of the Astoria-Megler Bridge in 1966, this was the only bridge over the Columbia west of Portland.
The bridge is 2,722 ft (830 m) long with 210 ft (64 m) of vertical clearance. The main span is 1,200 ft (366 m) long and the top of the bridge is 340 ft (104 m) above the river. It was designed by Joseph Strauss, the engineer of the Golden Gate Bridge.
In 1982, the bridge was entered on the National Register of Historic Places, as the Longview Bridge. A feasibility study commissioned by the Washington State Legislature in 1990 recommended the construction of a second bridge to handle future traffic volume. The Lewis and Clark Bridge was closed for four days in July 2023 to replace a floor beam and install new finger joints; during the closure, which was originally scheduled for eight days, the Wahkiakum County Ferry was used as a detour route for prioritized traffic.
From the Wikipedia article “Lewis and Clark Bridge (Columbia River)” (en.wikipedia.org/wiki/Lewis_and_Clark_Bridge_(Columbia_River)), by its contributors, under CC BY-SA 4.0 (creativecommons.org/licenses/by-sa/4.0/). Copied 2026-11-17; not changed.
Confirmed Two sources agree. Cited One source, and it names where it got it. One source One source, without a reference of its own. Sources disagree The sources disagree. We show the best-supported value and keep theirs below.
Picture: Cacophony, via Wikimedia Commons · CC BY-SA 3.0
