Reynolds analogy
Reynolds analogy is an Analogy in fluid dynamics.
All 1 facts, and where they come from
Facts
1 facts · 0 confirmed by two sources · 0 cited · 1 from one source
Where this comes from
Papalocal keeps its own record. It started from these sources; what each one said is kept here as it was copied, so a change on their side never changes this page by itself. Tap one to read its version.
What Wikidata says · copied November 17, 2026 · revision 2467431583
- Described as
- Analogy in fluid dynamics
- What it is
- physical theory
- Wikipedias with a page
- 5
Wikidata item Q2076621 (wikidata.org/wiki/Q2076621), public domain (CC0). Copied 2026-11-17.
What Wikipedia says · copied November 17, 2026 · revision 1365456205
The Reynolds Analogy is popularly known to relate turbulent momentum and heat transfer. That is because in a turbulent flow (in a pipe or in a boundary layer) the transport of momentum and the transport of heat largely depends on the same turbulent eddies: the velocity and the temperature profiles have the same shape.
The main assumption is that wall heat flux q˙w in a turbulent system is analogous to momentum flux, or wall shear stress, τw, which suggests that the ratio τwq˙w must be constant for similar geometry. A common example for "similar geometry" is every radial position around a pipe at some cross-section with circular shape.
If the wall shear stress (τw) is known, a relation for the turbulent heat flux (q˙w) can be found (or vice versa), making it a useful analogy for pipe flows and hypersonic applications where τw may be more easily estimated than q˙w.
This is often used to estimate wall heat flux on a body in a flow:q˙w≈τwcp(Tw−T∞)u∞
where:Tw,T∞ are the temperatures of the wall and freestream (or bulk, depending on application), respectively;
cp is the specific heat capacity at constant pressure for the fluid;
u∞ is the freestream (or bulk, depending on application) fluid velocity.The complete Reynolds analogy (in a form more often seen in relation to pipe flows) is:
f2=hcpG=k'cvavg
where:f is the Fanning friction factor;
h is the heat transfer coefficient;
cp is the specific heat at constant pressure;
G is the mass velocity (mass flow rate per unit area).
Experimental data for gas streams agree approximately with above equation if the Schmidt and Prandtl (Pr) numbers are near 1.0 and only skin friction is present in flow past a flat plate or inside a pipe. When liquids are present and/or form drag is present, the analogy is conventionally known to be invalid.
In 2008, the qualitative validity of Reynolds' analogy was re-visited for laminar flow of an incompressible fluid with variable dynamic viscosity (μ). It was shown that the inverse dependence of Reynolds number (Re) and skin friction coefficient (Cf) is the basis for the validity of the analogy in both constant and variable μ flows.
For μ=const., the analogy reduces to the popular form where the Stanton number (Ch or St) increases with increasing Re. For variable μ, it reduces to Ch increasing with decreasing Re.
This is represented by:s=2ChCf≈constant
where:s is the Reynolds analogy factor which is coupled to the Prandtl number via sPr≈0.8;
Cf is the skin friction coefficient given by Cf=2τw/(ρ∞u∞2);
ρ∞ is the freestream fluid density;
Ch is the Stanton number (also often denoted St). In supersonic/hypersonic applications, the Stanton Number is Ch=q˙w/(ρ∞u∞cp(Tw−Tr));
Tr is the recovery temperature, Tr=T∞+Pr1/3(γ−1)M∞2/2;
γ is the ratio of specific heats, γ=cp/cv;
M∞ is the freestream Mach number.Consequently, the Chilton–Colburn analogy is qualitatively valid whenever the Reynolds' analogy is valid. Furthermore, the validity of the analogy is linked to the applicability of Prigogine's Theorem of Minimum Entropy Production. Thus, Reynolds' analogy is valid for flows that are close to being fully developed, where changes in the gradients of velocity and temperature along the flow are small.
From the Wikipedia article “Reynolds analogy” (en.wikipedia.org/wiki/Reynolds_analogy), by its contributors, under CC BY-SA 4.0 (creativecommons.org/licenses/by-sa/4.0/). Copied 2026-11-17; not changed.
Confirmed Two sources agree. Cited One source, and it names where it got it. One source One source, without a reference of its own. Sources disagree The sources disagree. We show the best-supported value and keep theirs below.
