
Vernier scale
Vernier scale is an auxiliary scale of a measurement device, that aids to increase measurement precision.
All 3 facts, and where they come from
Facts
3 facts · 0 confirmed by two sources · 0 cited · 3 from one source
Where this comes from
Papalocal keeps its own record. It started from these sources; what each one said is kept here as it was copied, so a change on their side never changes this page by itself. Tap one to read its version.
What Wikidata says · copied November 19, 2026 · revision 2518144724
- Described as
- auxiliary scale of a measurement device, that aids to increase measurement precision
- What it is
- scientific instrument
- Named after
- Pierre Vernier; Pedro Nunes
- Wikipedias with a page
- 38
Wikidata item Q14946576 (wikidata.org/wiki/Q14946576), public domain (CC0). Copied 2026-11-19.
What Wikipedia says · copied November 19, 2026 · revision 1334997328
A vernier scale ( VUR-nee-ər), named after Pierre Vernier, is a visual aid to take an accurate measurement reading between two graduation markings on a linear scale by using mechanical interpolation, which increases resolution and reduces measurement uncertainty by using vernier acuity. It may be found on many types of instrument measuring length or measuring angles, but in particular on a vernier caliper, which measures lengths of human-scale objects (including internal and external diameters).
The vernier is a subsidiary scale replacing a single measured-value pointer, and has for instance ten divisions equal in distance to nine divisions on the main scale. The interpolated reading is obtained by observing which of the vernier scale graduations is coincident with a graduation on the main scale, which is easier to perceive than visual estimation between two points. Such an arrangement can go to a higher resolution by using a higher scale ratio, known as the vernier constant. A vernier may be used on circular or straight scales where a simple linear mechanism is adequate. Examples are calipers and micrometers to measure to fine tolerances, on sextants for navigation, on theodolites in surveying, and generally on scientific instruments.
The Vernier principle of interpolation is also used for electronic displacement sensors such as absolute encoders to measure linear or rotational movement, as part of an electronic measuring system.
From the Wikipedia article “Vernier scale” (en.wikipedia.org/wiki/Vernier_scale), by its contributors, under CC BY-SA 4.0 (creativecommons.org/licenses/by-sa/4.0/). Copied 2026-11-19; not changed.
Confirmed Two sources agree. Cited One source, and it names where it got it. One source One source, without a reference of its own. Sources disagree The sources disagree. We show the best-supported value and keep theirs below.
Picture: Wikimedia Commons: Vernier scale Direct vernier.gif · See Commons file page