Papalocal
Loading…
Papalocal · Things
Organization

Central European Arc Measurement

Central European Arc Measurement is a Central European Geodetic Association. It was founded in 1862.

Founded
1862
Industry
higher education
All 4 facts, and where they come from

Facts

4 facts · 0 confirmed by two sources · 2 cited · 2 from one source

What it is
learned society One source
Founded
1862 Cited
Ended
1867 Cited
Industry
higher education One source

Where this comes from

Papalocal keeps its own record. It started from these sources; what each one said is kept here as it was copied, so a change on their side never changes this page by itself. Tap one to read its version.

What Wikidata says · copied November 18, 2026 · revision 2497097182
Described as
Central European Geodetic Association
Other names
Mitteleuropäische Gradmessung
What it is
learned society
Founded
1862 · 1 reference
Ended
1867 · 1 reference
Industry
higher education
Wikipedias with a page
3

Wikidata item Q1541240 (wikidata.org/wiki/Q1541240), public domain (CC0). Copied 2026-11-18.

What Wikipedia says · copied November 18, 2026 · revision 1385876215

The Central European Arc Measurement (German: Mitteleuropäische Gradmessung) was established in Berlin in October 1864 following the creation of the Swiss Geodetic Commission in 1861 and a preliminary consultation between representatives of Prussia, Austria, and Saxony in April 1862. It became the European Arc Measurement (German: Europäische Gradmessung) in 1867 and the International Geodetic Association (German: Internationale Erdmessung) in 1886. In Brussels at the Inaugural General Assembly of the International Science Council (then the International Research Council), the International Union of Geodesy and Geophysics (IUGG) was established on 28 July 1919 to promote activities of already-existing international scientific societies among them the International Geodetic Association. At the first General Assembly of the International Union of Geodesy and Geophysics in Rome in 1922, it became one of its five constituent parts: the Geodesy Section. In August 1930 in Stockholm, the name was changed for Association of Geodesy. It officially adopted its current name, the International Association of Geodesy (IAG), in 1946.
The Swiss Geodetic Commssion aimed at contributing to determine anomalies in the Earth's shape by means of remeasuring Swiss geodetic network, combined with gravimetry (using Repsold-Bessel pendulum) and levelling, in order to gain an accurate understanding of the Earth's ellipsoid and to define the geoid, while accounting for vertical deflections.
Astronomic observations were carried out at observatories around Switzerland for positionning the geodetic network. In order to determine the longitudes, time was transmitted via telegraph lines. For instance, Emile Plantamour fourth director of the Observatory of Geneva collaborated with Adolphe Hirsch for determining the difference of longitude between Neuchâtel Observatory and the former Geneva Observatory then located between Geneva and the former municipality of Plainpalais. From 1862, Plantamour was a member of the Swiss Geodetic Commission. He took charge of five astronomical stations for which, as part of the Central European Arc Measurement project, it was necessary to determine the geographic latitude and the difference in longitude relative to the Federal Observatory in Zurich, and various surrounding connecting stations. He also used telegraphic methods to determine the longitude differences between Geneva and Strasbourg, Munich, Lyon, and Vienna.
Between 1864 and 1891, the Swiss Geodetic Commission carried out a measurement of leveled heights throughout Switzerland, published as the Nivellement de Precision. In 1891, Adolphe Hirsch deduced from all the junctions with foreign countries the altitude of 373.54 metres above the Sea as the reference point for the Swiss national heights network. In 1902, the elevation of the Pierres du Niton was redefined as 373.6 m above sea level. Jakob Hilfiker established its altitude with the mean sea level of Marseille as starting point.
Furthermore, Plantamour employed a reversible pendulum to investigate the acceleration due to gravity in Geneva and other locations. The measurements conducted using the Repsold-Bessel pendulum provided the absolute gravity intensity for each station. However, this instrument was delicate and difficult to transport. Consequently, it was not well-suited for determining gravity intensity at a large number of stations. Robert von Sterneck was the inventor of relative gravity measurement and the designer of the half-second (Sterneck) pendulum. This work informed the Earth ellipsoid proposed by Friedrich Robert Helmert in 1901. A model whose parameter values ​​​​were remarkably close to reality.
The convention of the International Geodetic Association expired at the end of 1916. It was not renewed due to the First World War. However, Denmark, the Netherlands, Norway, Spain, Sweden, Switzerland, and the United States agreed to maintain a limited geodetic association among neutral states, presided over by Raoul Gautier, director of the Geneva Observatory.
The war also put an end to other initiatives aimed at promoting international scientific collaboration, which had begun with the creation of the International Association of Academies in Wiesbaden on October 9, 1899.
During World War I, many scientists took an interest in how international scientific work might be resumed once hostilities had ended. One idea, primarily American and British in origin, was to bring together the scientific unions representing various disciplines under the authority of a supreme council. An international conference, held in Brussels in July 1919 and attended by scientists from the Allied and Associated Powers (those that had fought against Germany) as well as from a number of neutral states, established an International Research Council and various affiliated unions. Geodesy, however, rather than remaining free and independent as it had been before, was incorporated into the geophysical sciences within the International Union of Geodesy and Geophysics.
Raoul Gautier was appointed in 1922 as vice-president of the Section of Geodesy of the International Union of Geodesy and Geophysics and ensured the continuity of operations carried out by the Association Géodesique réduite entre États neutres (Limited Geodetic Association between Neutral States), notably those of the International Latitudes Service.
From 1922 to 1946, General Georges Perrier served as secretary-general of the Geodesy Section of the International Union of Geodesy and Geophysics, and subsequently of the International Association of Geodesy, whose central bureau was relocated from Potsdam to Paris (1917–1995). William Bowie held the presidency of the Geodesy Section of the International Union of Geodesy and Geophysics (1922–1933), and later served as president of the International Union of Geodesy and Geophysics itself (1933–1936), succeeding Charles Lallemand, the Union’s first president (1919–1933).

From the Wikipedia article “Central European Arc Measurement” (en.wikipedia.org/wiki/Central_European_Arc_Measurement), by its contributors, under CC BY-SA 4.0 (creativecommons.org/licenses/by-sa/4.0/). Copied 2026-11-18; not changed.

Confirmed Two sources agree. Cited One source, and it names where it got it. One source One source, without a reference of its own. Sources disagree The sources disagree. We show the best-supported value and keep theirs below.

People connected 1

Members