Papalocal
Loading…
Papalocal · Things

Z3 is the first working programmable, fully automatic digital computer. It came out in 1941. It was created by Konrad Zuse and Helmut Schreyer.

Released
1941
Came out
1941
Created by
Konrad Zuse
All 12 facts, and where they come from

Facts

12 facts · 0 confirmed by two sources · 0 cited · 12 from one source

What it is
electro-mechanical computer One source
one-of-a-kind computer One source
Created by
Konrad Zuse One source
Helmut Schreyer One source
Released
1941 One source
Comes after
Z2 One source
Followed by
Z4 One source
Came out
1941 One source
Located in
Berlin One source
Country
German Reich One source
Named after
Konrad Zuse One source

Where this comes from

Papalocal keeps its own record. It started from these sources; what each one said is kept here as it was copied, so a change on their side never changes this page by itself. Tap one to read its version.

What Wikidata says · copied November 17, 2026 · revision 2559973619
Described as
first working programmable, fully automatic digital computer
Other names
Plankalkuel, Z-3, Z3 (computer), Zuse Z3
What it is
electro-mechanical computer; one-of-a-kind computer; Turing completeness
Created by
Konrad Zuse; Helmut Schreyer
Released
1941
Comes after
Z2
Followed by
Z4
Came out
1941
Located in
Berlin
Country
German Reich
Named after
Konrad Zuse
Wikipedias with a page
35

Wikidata item Q222419 (wikidata.org/wiki/Q222419), public domain (CC0). Copied 2026-11-17.

What Wikipedia says · copied November 17, 2026 · revision 1384446679

The Z3 was a German electromechanical computer designed by Konrad Zuse in 1938, and completed in 1941. It was the world's first working programmable, fully automatic digital computer. The Z3 was built with 2,600 relays, implementing a 22-bit word length that operated at a clock frequency of about 5–10 Hz. Program code was stored on punched film. Initial values were entered manually.
The Z3 was completed in Berlin in 1941. It was not considered vital, so it was never put into everyday operation. Based on the work of the German aerodynamics engineer Hans Georg Küssner (known for the Küssner effect), a "Program to Compute a Complex Matrix" was written and used to solve wing flutter problems. Zuse asked the German government for funding to replace the relays with fully electronic switches, but funding was denied during World War II since such development was deemed "not war-important".
The original Z3 was destroyed on 21 December 1943 during an Allied bombardment of Berlin. That Z3 was originally called V3 (Versuchsmodell 3 or Experimental Model 3) but was renamed so that it would not be confused with Germany's V-weapons. A fully functioning replica was built in 1961 by Zuse's company, Zuse KG, which is now on permanent display at Deutsches Museum in Munich.
The Z3 was demonstrated in 1998 to be, in principle, Turing-complete. However, because it lacked conditional branching, the Z3 only satisfies this definition by speculatively computing all possible outcomes of a calculation.
Thanks to this machine and its predecessors, Konrad Zuse has often been suggested as the inventor of the computer.

From the Wikipedia article “Z3 (computer)” (en.wikipedia.org/wiki/Z3_(computer)), by its contributors, under CC BY-SA 4.0 (creativecommons.org/licenses/by-sa/4.0/). Copied 2026-11-17; not changed.

Confirmed Two sources agree. Cited One source, and it names where it got it. One source One source, without a reference of its own. Sources disagree The sources disagree. We show the best-supported value and keep theirs below.

Picture: Wikimedia Commons: Z3 Deutsches Museum.JPG · See Commons file page

People connected 1

Known for it